The disassembly process of the Heavy Hex Bolt :

1. If you want to remove the hexagonal screw, we need to prepare a screwdriver and a rubber gasket put the rubber gasket directly on the hexagonal screw, and use a screwdriver to unscrew the hexagonal screw directly. Because of the gasket, it can make a certain gap between the hexagon screws loose.

2. But there is a situation where the screw is slippery, which may cause it to be difficult to remove. There are many reasons for the slippage, such as the quality of the screw is relatively poor, the strength is not up to the standard, or the screw has been rusted after long-term use, which will also cause the screw to slip.

3. In this case, you can prepare a pair of pliers, tighten the screw head, and unscrew it in the opposite direction. If it really doesn't work, prepare a file, make a notch on the screw head, such as a flat-blade, and then use a flat-blade screwdriver to unscrew it.