Bolts Factory introduces the installation method of stud bolts:

1. Lubricating oil must be used when installing the stud bolts. This is to prevent the bolts from being jammed during the screwing process, and they can also be disassembled for repeated installation. In order to ensure the tightness of the fastening ends of the stud bolts and the threads of the equipment body, and avoid any loosening of the stud bolts during the process of assembling and disassembling the nuts, the fastening ends of the stud bolts should be used. Wave, after giving the pitch diameter has a certain amount of interference. You can choose the form of shoulder structure or the method of tightening with a shallow depth of the next few threads. When the double-ended bolt is installed in the soft material thread machine, the interference can be slightly larger. some.

2. The axis line of the stud bolt must be perpendicular to the surface of the machine body. You must pay attention to this when drilling and tapping. It is best to check with a square when installing. When there is a small amount of the axis line and the surface of the machine body When tilting, you can use a tap to correct the screw hole. When the tilt is large, you can't use brute force to correct it to prevent the bolt from being damaged.

3. Stud bolts have the function of fixed links connecting machinery. Both ends of the stud bolts are threaded, and the screw in the middle is thick and thin. Stud bolts are mainly used for boiler steel structures, mining machinery, bridges, and motorcycles. , Automobiles, large-span steel structures, suspended towers,  and large buildings.